Description
The primary hydraulic routing network of the 6-ton Doosan DH60-7 (and DH60-7 Gold) excavator directs high-pressure fluid from the main pump to the boom, stick, bucket, swing, dozer blade, and travel motors. Tatan Machinery stocks and supplies 100% Brand New multi-spool hydraulic main control valve assemblies (OEM reference: 401-00058 / 401-00058A, interchangeable with 2436-1004C / 2436-1006). Built with micro-finished alloy steel spools and pre-calibrated port relief cartridges, each complete assembly restores precise compounding control and holding power. Backed by our 12-Month Comprehensive Replacement Warranty.
Commercial Product Profile
Wholesale Buyer Protection
Physical Storefront & Showroom Product Display
Tatan Machinery is a verified first-party physical stocking wholesaler of excavator hydraulic assemblies. We do not dropship unverified products. Below is our physical showroom control valve presentation:
Actual shelf display and physical showroom stock at Tatan Machinery facility
Technical Specifications & Operating Parameters
| Parameter | Engineering Metric |
|---|---|
| Hydraulic Circuit Architecture | Open-Center Multi-Spool Monoblock with Parallel Flow Logic |
| Main Implement Set Pressure | 24.5 MPa (250 bar / 3,553 PSI) Factory Calibrated Main Relief |
| Rated Intake Flow Capacity | Approx. 140–160 L/min (Matched for DH60-7 Variable Piston Pump) |
| Control Actuation Mode | Full Hydraulic Pilot Operation with Dozer & Auxiliary Breaker Slices |
| Total Assembly Weight | Approx. 72 kg (158 lbs) High-Tensile Cast Monoblock Body |
| Compatible Machine Models | Doosan DH60-7, DH60-7 Gold, DX60 (6.0-Ton Class) |
Field Diagnostics: Why Rebuilding Worn DH60-7 Control Valves Fails
The Doosan DH60-7 handles heavy rock trenching, basement digging, and hydraulic hammer breaking. Over thousands of hours, high-pressure fluid wear inside the valve body causes issues that simple seal kits cannot cure:
- Dozer Blade Bleed-Down & Loss of Machine Stabilization: When jacking the excavator up on its front dozer blade to clear tracks, the blade sinks within minutes. Pilot-operated holding check valve seats or spool bores have washed out, failing to hold hydraulic pressure.
- Boom & Arm Drift under Suspended Load: Lifting heavy pipes or trench boxes causes the boom to slowly creep down with joysticks in neutral. Spool-to-bore clearances exceeding 0.018mm dump high-pressure holding oil directly back to tank.
- Sluggish Compound Motions (Boom-Up + Stick-Crowd Hesitation): Scorched internal metering notches fail to divide flow properly between circuits. The excavator jerks or slows down when trying to dig and lift simultaneously.
- Washed-Out Main Relief Valve Seats: Fluid erosion around the main relief cartridge continuously bleeds pump pressure, overheating the hydraulic tank (>85°C) and killing breakout force.
12-Month Comprehensive Replacement Warranty
Every 100% Brand New 401-00058 control valve supplied by Tatan Machinery includes our full 12-Month Replacement Guarantee:
- Full Hydraulic Coverage: Body casting crack failures, internal spool scoring, dozer holding valve leakage, and relief regulation failure resulting from manufacturing defects.
- Direct Replacement Support: If any defect occurs under proper hydraulic maintenance, we dispatch immediate replacement components or complete valve blocks without lengthy disputes.
Export Heavy-Duty Packaging Protocol & Crating Video
A heavy 72 kg multi-spool valve block requires clinical protection against contamination and transit shock:
- 100% Sealed Port Caps: Every hydraulic work port, pump inlet, tank return, and auxiliary line port is sealed with heavy-duty threaded protective plugs.
- VCI Vapor-Phase Anti-Corrosion Wrap: The bare valve block is coated with rust-inhibiting hydraulic film and hermetically vacuum-sealed in VCI plastic foil.
- Custom Internal Structural Timber Cushioning: Bolted securely onto structural base timbers inside the crate to prevent any shift.
- ISPM 15 Fumigation-Free Solid Plywood Box: Fully enclosed export crate banded with multiple high-tensile galvanized steel straps.
📹 Live Wooden Crate Packaging & Dispatch Video
Watch our export team crate, bolt down, and band this brand-new 401-00058 control valve:
✓ Live crating and strapping filmed at Tatan Machinery dispatch dock
Supported Global Logistics & Customs Documentation
Prompt logistics dispatch adapted for urgent machine-down emergencies and trade stock:
- Air Express (3–7 Days Door-to-Door): Handled via DHL Express, FedEx, or air cargo for rapid jobsite recovery.
- Sea Freight Consolidation: Economical LCL shipping for distributors stocking multiple units.
- Tariff-Ready Paperwork: Commercial invoice detailing official HS Code (8481.20 – Valves for Oleohydraulic Transmission), packing lists, and Certificate of Origin (COO) upon request.
Daily overseas air express dispatches and consolidated container freight
Buyer Procurement FAQ: Key Decision Factors
Q: Is this 401-00058 control valve brand new or remanufactured? Does it include relief valves?
A: This main control valve assembly is 100% Brand New with zero operating hours. It comes completely assembled with brand-new main relief valves, port overload relief valves, and dozer holding valves. It is a complete drop-in replacement ready to mount onto your Doosan DH60-7 excavator.
Q: Are your hydraulic pumps and other products brand new as well?
A: Yes. All our hydraulic pumps, main control valves, final drive travel motors, and swing motors are 100% Brand New. Only our heavy diesel engine assemblies on this site are professionally remanufactured with brand-new internal wear components. You can order with absolute confidence in factory-new metallurgical reliability.
Q: My DH60-7 is a Gold edition with auxiliary breaker piping. How do you confirm port matching?
A: Doosan DH60-7 and DH60-7 Gold excavators feature dedicated auxiliary spools for breakers and thumbs. Send your machine serial number (PIN) from the cab tag and clear photos of your current valve’s top port arrangement to Gavin. We cross-verify the exact hydraulic schematic in the official Doosan EPC database within 10 minutes.
Q: Can I see live photos and serial tags of the exact valve assigned to my order before paying?
A: Absolutely yes. Transparency is our core commitment. Prior to balance payment and dispatch, we send clear high-resolution photos and video showing the stamped valve body numbers, port sealing plugs, relief valve cartridges, and the export wooden box crating process.
Q: What happens if the valve crate is damaged during sea freight, and what customs documentation is supplied?
A: Every shipment from Tatan Machinery is covered by full commercial marine cargo insurance. The valve block is sealed with heavy steel plates and bolted into an ISPM 15 solid wooden crate. We supply commercial invoices with accurate HS Codes (8481.20 – Valves for Oleohydraulic Transmission), packing lists, and Certificates of Origin for smooth customs clearance at your destination port.
🔗 Frequently Purchased Together with Doosan DH60-7 Main Control Valve:
- DIESEL ENGINE:
Doosan DH60-7 Yanmar 4TNV94L Diesel Engine Assembly
Remanufactured - HYDRAULIC PUMP:
Main Hydraulic Pump Assembly for Doosan DH60-7
100% Brand New - SWING MOTOR:
Hydraulic Swing Motor Assembly for Doosan DH60-7
100% Brand New - FINAL DRIVE:
Final Drive Travel Motor Assembly for Doosan DH60-7
100% Brand New - BRAND CATALOG:
View All Doosan Excavator & Heavy Equipment Parts Collection
Get Wholesale Factory Quote for Doosan DH60-7 Control Valve 401-00058
Looking for direct factory pricing, stock availability, or 12-month warranty terms for Doosan DH60-7 control valves? Contact senior specialist Gavin now!
💡 Fast Quote: Send your machine serial number or old valve nameplate photos for an accurate match within 10 minutes!
* Note: Wholesale Reference Price Starts From $300.00. Please contact Gavin for a final customized quote based on freight destination and configuration.
* Note: Wholesale Reference Price Starts From $300.00. Please contact Gavin for a final customized quote.
Reviews
There are no reviews yet.