Tatan Volvo D13F Diesel Engine Assembly for Volvo EC460C EC480D Excavator

The Volvo D13F Diesel Engine Assembly (OEM Part No. D13F / 11110000 / 11110750) by Tatan belongs to our heavy-duty Diesel Engine Assembly category. Engineered specifically for Volvo EC460C, EC460C L, EC480D, and EC480D L 46-to-50 ton heavy mining excavators, this high-torque 12.8L 6-cylinder electronic unit-injector engine delivers exceptional digging force, rapid hydraulic response, and low fuel consumption under extreme rock quarrying conditions.

Need an Instant Quote for Volvo D13F Diesel Engine Assembly?

Contact Senior Parts Specialist Gavin directly:

💬 WhatsApp:

Chat with Gavin on WhatsApp

✉️ Email:

[email protected]

Key Product Highlights:

  • Product Category & Model: Diesel Engine Assembly | Volvo D13F 12.8L 6-Cylinder Engine.
  • Machine Fitment: Compatible with Volvo EC460C, EC460C L, EC480D, EC480D L excavators, L220F loaders, and A40F haulers.
  • OEM Part Number Reference: Direct replacement for Volvo OEM part numbers D13F, 11110000, 11110750, and 21110000.
  • 100% Dyno Tested: Full engine dynamometer performance, EMS 2 fuel injection pressure, and cooling test report provided before dispatch.
  • Factory Direct Wholesale Price: Cut middleman markup and save up to 40% on complete heavy mining excavator engine replacement.
  • No Minimum Order Quantity (MOQ 1 PC): Available for single workshop replacement orders or bulk equipment fleet replenishment.
  • 100% Fitment Guarantee: Free engine serial number and flywheel housing verification by Gavin before shipping.

Description

Volvo D13F Diesel Engine Assembly Overview

The Volvo D13F Diesel Engine Assembly (OEM Part Numbers: D13F, 11110000, 11110750, 21110000) manufactured by Tatan is a 12.8L 6-cylinder turbocharged water-cooled engine belonging to our Diesel Engine Assembly classification. Engineered specifically for Volvo EC460C, EC460C L, EC480D, and EC480D L 46-to-50 ton heavy mining excavators, replacing your worn engine with a Tatan complete D13F assembly eliminates machine downtime, excessive blow-by, and severe hydraulic power loss instantly.

Built strictly according to original OEM specifications, this complete engine assembly comes pre-assembled with EMS 2 electronic unit injectors, high-pressure fuel pump, turbocharger, starter motor, and alternator, ensuring 100% direct bolt-on fitment with hydraulic pump couplings and mounting brackets.

⚠️ Technical Verification Notice: Volvo D13F engines have minor variations in EMS 2 wiring harness plugs, flywheel housing bolt patterns, and oil pan sumps depending on machine applications (EC460C vs. EC480D vs. L220F loader). Please send your original engine nameplate photo or serial number to Gavin for free verification before ordering.

Key Attributes & Parameters for Volvo D13F Diesel Engine Assembly

Product CategoryDiesel Engine AssemblyWarranty1 Year / 12 Months
Specific Engine ModelVolvo D13F / D13F-A EngineBrand NameTatan
Compatible EquipmentVolvo EC460C | EC480DOEM Part NumberD13F / 11110000
Engine Displacement12.8 Liters (12800 cc / 12.8L)Cylinder Arrangement6 Cylinders Inline (I-6) 4-Stroke
Horsepower & RPM235-350 kW (315-470 HP) @ 1700-1900Cooling SystemWater-Cooled / Liquid Cooled
Fuel Injection SystemElectronic Unit Injectors (EMS 2 ECU)Aspiration TypeTurbocharged & Charge Air Intercooled
Machinery Test ReportProvided (100% Dyno Tested)Video Outgoing-InspectionProvided Before Shipping
Quality Status100% Brand New EnginePackagingExport Wooden Box Packaging

Supported Machinery Brands & Engine Parts Coverage

In addition to Volvo, Tatan manufactures replacement complete diesel engines and overhaul components for leading machinery brands:

Tatan Compatible Excavator Machinery Brands Display Volvo Komatsu Caterpillar Hitachi Kobelco Cummins

Application Scenarios & Buyer Value

When upgrading or replacing your 46-to-50 ton mining excavator engine with our Volvo D13F Diesel Engine Assembly, buyers achieve maximum operational uptime and power efficiency:

Application ScenarioValue Delivered to Buyer
Volvo EC460C / EC480D Engine SwapComplete engine swap cuts machine repair downtime by up to 70% compared to internal rebuilding.
Excavator Overhaul WorkshopsEliminates tedious EMS 2 electronic unit injector calibration, liner honing, and crank fitting; saves mechanic labor hours.
Engine Distributors & StockistsHigh-demand 12.8L heavy mining excavator engine ready for immediate resale to plant hire fleets and mining networks.
Rental Fleet MaintenanceExtends 46-to-50 ton excavator working lifespan and restores full digging hydraulic torque under load.

Volvo D13F Diesel Engine Assembly OEM Diagnostic Guide

Use this OEM manual diagnostic guide to troubleshoot operational engine symptoms on your Volvo 50-ton mining excavator:

Engine SymptomTechnical Cause AnalysisTatan Factory-Grade Solution
1. Hard cold starting & EMS 2 Fuel Pressure FaultElectronic unit injector solenoid wear or fuel feed pump supply pressure drop below OEM limit (<0.4 MPa).Inspect EMS 2 wiring & fuel pump, or replace with Tatan complete Volvo D13F engine assembly.
2. Severe power loss & dense black smoke under digging loadVGT turbocharger actuator failure leading to low boost (<1.4 bar) or electronic unit injector nozzle tip fouling.Inspect turbocharger boost pressure or swap to a Tatan factory pre-tested D13F engine assembly.
3. High engine oil consumption & heavy crankcase blow-byScored 12.8L cylinder liners, stuck oil rings, or valve stem seal wear allowing engine oil into combustion chambers.Install Tatan new D13F complete engine; flush engine oil gallery and replace oil filter.
4. Engine overheating & coolant surge into expansion tankWater pump impeller erosion, clogged radiator core, or cylinder head gasket leaking combustion gas into cooling jacket.Replace thermostat (82°C), flush cooling system, or swap to a new Volvo D13F complete engine assembly.

Transport Packaging & Fast Global Shipping

To ensure 100% damage-free international transport, every Tatan Volvo D13F engine assembly undergoes anti-rust oiling, waterproof plastic sealing, and solid export wooden box packaging.

Global shipping supported by multiple logistics companies DHL FedEx UPS Sea Air Freight

✈️ Express Air Courier

Partnered with DHL, FedEx, UPS, and TNT for express door-to-door delivery worldwide.

🚢 Sea Cargo Freight

LCL and FCL ocean container shipping for heavy engine assemblies and bulk orders.

📦 Export Wooden Cases

Fumigated solid wooden boxes with thick shockproof foam lining for maximum safety.

Quality Control & International Certificates

Tatan diesel engines are manufactured under ISO 9001 quality management systems and strictly comply with CE safety standards.

Tatan Quality Assurance ISO9001 CE Qualification Certificates

Volvo D13F Engine FAQ & Related Categories

Q1: Is this Volvo D13F Diesel Engine Assembly compatible with Volvo EC460C and EC480D excavators?
A: Yes. The Volvo D13F engine is the standard OEM engine for Volvo EC460C, EC460C L, EC480D, and EC480D L mining excavators. Send your original engine serial number or nameplate photo to Gavin for precise EMS 2 wiring harness verification.
Q2: Does the engine assembly include electronic unit injectors and turbocharger?
A: Yes. Tatan complete engine assemblies come pre-assembled with EMS 2 electronic unit injectors, fuel feed pump, turbocharger, starter motor, and alternator ready for installation.
Q3: What are the primary OEM part numbers for the Volvo D13F engine?
A: Common OEM reference numbers include D13F, 11110000, 11110750, and 21110000.

Get Wholesale Factory Quote for Volvo D13F Diesel Engine Assembly

Looking for direct factory pricing, stock availability, or technical advice for Volvo D13F engines? Contact senior engineer Gavin now!

💡 Fast Quote: Send your engine serial number or nameplate photos for a 100% accurate match within 10 minutes!

* Note: Wholesale Reference Price Starts From $300.00. Please contact Gavin for a final customized quote.

Reviews

There are no reviews yet.

Be the first to review “Tatan Volvo D13F Diesel Engine Assembly for Volvo EC460C EC480D Excavator”

Your email address will not be published. Required fields are marked *