MAG-26VP 708-2G-00030 Travel Motor Final Drive Assembly for Komatsu PC130-7 Excavator

The MAG-26VP 708-2G-00030 Travel Motor Final Drive Assembly by Tatan belongs to our heavy-duty Excavator Final Drive Travel Motor category. Engineered specifically for Komatsu PC130-7 and PC130-7K 13-ton mid-size excavators, this Kayaba MAG-26VP 2-speed axial piston travel motor with planetary reduction gearbox restores 100% tracking speed, climbing torque, and gradeability without any hydraulic hose modifications.

Need an Instant Quote for MAG-26VP 708-2G-00030 Travel Motor?

Contact Senior Parts Specialist Gavin directly:

💬 WhatsApp:

Chat with Gavin on WhatsApp

✉️ Email:

[email protected]

5 Key Solutions Buyers Get from Tatan:

  • Fixes 13-Ton Excavator Off-Tracking: Replaces worn travel motors to eliminate single-side slow tracking and restore equal left/right track power.
  • Zero Gear Oil Leakage Guarantee: Pre-installed with forged alloy steel Duo-Cone mechanical floating seals to prevent mud and water ingress.
  • 100% Direct Bolt-On Installation: 1:1 OEM sprocket flange pattern and standard SAE port threads match Komatsu PC130-7 track frames seamlessly.
  • Smooth 2-Speed High/Low Switching: Automatic swashplate displacement adjustment provides high torque for slope climbing and fast transport.
  • 100% Factory Bench Pressure Tested: Dyno-tested under 34.3 MPa relief pressure for zero internal bypass before shipping.

Description

MAG-26VP 708-2G-00030 Travel Motor Final Drive Assembly Overview

The MAG-26VP 708-2G-00030 Travel Motor Final Drive Assembly (OEM Part Numbers: 708-2G-00030, 708-2G-00031, 708-2G-00032, MAG-26VP) manufactured by Tatan is a heavy-duty Kayaba series hydraulic travel device belonging to our Excavator Final Drive Travel Motor classification. Specially engineered for Komatsu PC130-7 and PC130-7K 13-ton excavators, this complete travel motor with planetary reduction gearbox delivers smooth 2-speed travel, powerful pulling force, and equal tracking torque under muddy and rocky job site conditions.

Constructed strictly according to original OEM specifications, this travel motor assembly integrates an axial piston motor and a heavy-duty planetary reduction gearbox, ensuring 100% direct bolt-on fitment to track frame sprockets without hose modification.

⚠️ Tracking Fitment Technical Verification: Komatsu PC130-7 excavators may feature different sprocket bolt hole patterns depending on production years. Please send your original travel motor sprocket bolt count or nameplate photo to Gavin for free verification before dispatch.

Key Attributes & Parameters for MAG-26VP 708-2G-00030 Travel Motor

Product CategoryExcavator Final Drive Travel MotorWarranty1 Year / 12 Months
Specific Motor ModelKayaba MAG-26VP / GM24 MotorBrand NameTatan
Compatible EquipmentKomatsu PC130-7 | PC130-7K ExcavatorOEM Part Number708-2G-00030 / MAG-26VP
Matched Engine SeriesKomatsu S4D102E / 4D102E-1 EnginePlace of OriginGuangdong, China
Max Working Pressure34.3 MPa (343 bar / 4970 PSI)Reduction RatioHeavy-Duty Gearbox (~43.8:1)
Floating Seal TypeDuo-Cone Mechanical SealsQuality Status100% Brand New Assembly
Machinery Test ReportProvided (100% Bench Tested)Video Outgoing-InspectionProvided Before Shipping
Gear Oil SpecSAE 80W-90 Heavy Duty Gear OilPackagingExport Wooden Box Packaging

Supported Machinery Brands & Final Drive Parts Coverage

In addition to Komatsu, Tatan manufactures replacement complete travel motors and final drives for major excavator brands:

Tatan Compatible Excavator Machinery Brands Display Komatsu Kobelco Caterpillar Hitachi Volvo Doosan

Application Scenarios & Buyer Value

When replacing your 13-ton excavator undercarriage drive with our MAG-26VP 708-2G-00030 Travel Motor, buyers achieve maximum operational uptime and pulling power:

Application ScenarioValue Delivered to Buyer
Komatsu PC130-7 Travel Motor ReplacementComplete assembly replacement eliminates single-side off-tracking and restores equal 2-speed travel power.
Undercarriage Repair WorkshopsReplaces complex planetary gear rebuilding; saves mechanic labor hours and prevents field leak warranties.
Parts Dealers & StockistsHigh-demand 13-ton excavator final drive stock item ready for fast local sale to construction contractors.
Rental Fleet MaintenanceExtends excavator working hours and ensures maximum job site productivity.

MAG-26VP 708-2G-00030 Travel Motor OEM Diagnostic Guide

Use this OEM manual diagnostic guide to troubleshoot tracking and travel motor issues on your Komatsu PC130-7 excavator:

Hydraulic/Mechanical SymptomTechnical Cause AnalysisTatan Factory-Grade Solution
1. Excavator tracking off-steer / One side slowWorn motor piston cylinder block or pilot swashplate angle wear causing internal oil bypass under 34.3 MPa load.Replace with Tatan MAG-26VP complete 708-2G-00030 final drive motor assembly; check center swivel joint seals.
2. Gear oil leaking into track sprocket hubDuo-Cone floating seal face damage or rubber O-ring degradation allowing gear oil to escape from hub.Replace complete final drive assembly or install high-durability forged steel Duo-Cone floating seal kit.
3. Loud metallic grinding noise during travel1st or 2nd planetary gear tooth breakage or needle bearing collapse due to insufficient gear oil lubrication.Install Tatan new complete travel motor with gearbox; refill with SAE 80W-90 heavy-duty gear oil before operation.
4. High-speed (Rabbit speed) shift failure2-speed shift pilot control spool sticking or pilot line pressure drop (<2.5 MPa) to swashplate piston.Clean 2-speed control valve spool, check pilot shift pressure, or replace complete travel motor assembly.

Transport Packaging & Fast Global Shipping

To ensure 100% damage-free international transport, every Tatan MAG-26VP 708-2G-00030 travel motor final drive undergoes anti-rust oiling, waterproof plastic sealing, and solid export wooden box packaging.

Global shipping supported by multiple logistics companies DHL FedEx UPS Sea Air Freight

✈️ Express Air Courier

Partnered with DHL, FedEx, UPS, and TNT for express door-to-door delivery worldwide.

🚢 Sea Cargo Freight

LCL and FCL ocean container shipping for heavy final drive assemblies and bulk orders.

📦 Export Wooden Cases

Fumigated solid wooden boxes with thick shockproof foam lining for maximum safety.

Quality Control & International Certificates

Tatan final drive travel motors are manufactured under ISO 9001 quality management systems and strictly comply with CE safety standards.

Tatan Quality Assurance ISO9001 CE Qualification Certificates

MAG-26VP 708-2G-00030 Travel Motor FAQ & Related Categories

Q1: Is this MAG-26VP 708-2G-00030 Travel Motor final drive assembly compatible with Komatsu PC130-7 and PC130-7K excavators?
A: Yes. The Kayaba MAG-26VP travel motor is the standard OEM drive for Komatsu PC130-7 and PC130-7K mid-size excavators. Send your original motor sprocket bolt count to Gavin for precise flange double-checking.
Q2: Does the travel motor come filled with gear oil in the reduction gearbox?
A: Travel motors are drained of gear oil prior to air transport. You MUST fill the planetary gearbox with SAE 80W-90 gear oil until it reaches the level plug before initial machine operation.
Q3: What are the primary OEM part numbers for the Komatsu PC130-7 travel motor?
A: Common OEM reference numbers include 708-2G-00030, 708-2G-00031, 708-2G-00032, and MAG-26VP.

Get Wholesale Factory Quote for MAG-26VP 708-2G-00030 Travel Motor

Looking for direct factory pricing, stock availability, or technical advice for MAG-26VP 708-2G-00030 travel motors? Contact senior engineer Gavin now!

💡 Fast Quote: Send your machine serial number or old motor photos for a 100% accurate match within 10 minutes!

* Note: Wholesale Reference Price Starts From $300.00. Please contact Gavin for a final customized quote.

Reviews

There are no reviews yet.

Be the first to review “MAG-26VP 708-2G-00030 Travel Motor Final Drive Assembly for Komatsu PC130-7 Excavator”

Your email address will not be published. Required fields are marked *