Tatan Hyundai R130-7 Excavator Diesel Engine Assembly for Hyundai R130-7 R140LC-7

The Hyundai R130-7 Diesel Engine Assembly (OEM Part No. 130-7 / R130-7 / 11N4-00010) by Tatan belongs to our heavy-duty Diesel Engine Assembly category. Engineered specifically for Hyundai Robex R130-7, R130LC-7, and R140LC-7 13-to-14 ton excavators, this high-performance 4-cylinder mechanical injection engine delivers smooth hydraulic power, high torque output, and low fuel consumption under demanding digging and trenching conditions.

Need an Instant Quote for Hyundai R130-7 Diesel Engine Assembly?

Contact Senior Parts Specialist Gavin directly:

💬 WhatsApp:

Chat with Gavin on WhatsApp

✉️ Email:

[email protected]

Key Product Highlights:

  • Product Category & Model: Diesel Engine Assembly | Hyundai R130-7 / R140LC-7 4-Cylinder Engine.
  • Machine Fitment: Compatible with Hyundai Robex R130-7, R130LC-7, R140LC-7, and R140LC-7A excavators.
  • OEM Part Number Reference: Direct replacement for Hyundai OEM part numbers 130-7, R130-7, R140LC-7, and 11N4-00010.
  • 100% Dyno Tested: Full engine dynamometer performance, fuel injection pressure, and cooling test report provided before dispatch.
  • Factory Direct Wholesale Price: Cut middleman markup and save up to 40% on complete excavator engine replacement.
  • No Minimum Order Quantity (MOQ 1 PC): Available for single workshop replacement orders or bulk equipment fleet replenishment.
  • 100% Fitment Guarantee: Free engine serial number and flywheel housing verification by Gavin before shipping.

Description

Hyundai R130-7 Diesel Engine Assembly Overview

The Hyundai R130-7 Diesel Engine Assembly (OEM Part Numbers: 130-7, R130-7, R140LC-7, 11N4-00010) manufactured by Tatan is a 4-cylinder turbocharged water-cooled engine belonging to our Diesel Engine Assembly classification. Engineered specifically for Hyundai Robex R130-7, R130LC-7, and R140LC-7 13-to-14 ton excavators, replacing your worn engine with a Tatan complete R130-7 assembly eliminates machine downtime, excessive blow-by, and severe hydraulic power loss instantly.

Built strictly according to original OEM specifications, this complete engine assembly comes pre-assembled with mechanical fuel injection pump, turbocharger, starter motor, and alternator, ensuring 100% direct bolt-on fitment with hydraulic pump couplings and mounting brackets.

⚠️ Technical Verification Notice: Hyundai R130-7 / R140LC-7 engines have minor variations in flywheel housing bolt patterns, starter angles, and oil pan sumps depending on specific engine platforms (Cummins B3.3 vs 4BT3.9 vs Mitsubishi 4D34). Please send your original engine nameplate photo or serial number to Gavin for free verification before ordering.

Key Attributes & Parameters for Hyundai R130-7 Diesel Engine Assembly

Product CategoryDiesel Engine AssemblyWarranty1 Year / 12 Months
Specific Engine ModelHyundai R130-7 / R140LC-7 EngineBrand NameTatan
Compatible EquipmentHyundai R130-7 | R140LC-7OEM Part Number130-7 / 11N4-00010
Engine Displacement3.3L – 3.9L (3300 – 3900 cc)Cylinder Arrangement4 Cylinders Inline (I-4) 4-Stroke
Horsepower & RPM62-85 kW (83-114 HP) @ 2100-2200Cooling SystemWater-Cooled / Liquid Cooled
Machinery Test ReportProvided (100% Dyno Tested)Video Outgoing-InspectionProvided Before Shipping
Aspiration TypeTurbocharged & Charge Air CooledPlace of OriginGuangdong, China
Quality Status100% Brand New EnginePackagingExport Wooden Box Packaging

Supported Machinery Brands & Engine Parts Coverage

In addition to Hyundai, Tatan manufactures replacement complete diesel engines and overhaul components for leading machinery brands:

Tatan Compatible Excavator Machinery Brands Display Hyundai Komatsu Caterpillar Hitachi Kobelco Volvo Cummins

Application Scenarios & Buyer Value

When upgrading or replacing your 13-to-14 ton excavator engine with our Hyundai R130-7 Diesel Engine Assembly, buyers achieve maximum operational uptime and power efficiency:

Application ScenarioValue Delivered to Buyer
Hyundai R130-7 / R140LC-7 Engine SwapComplete engine swap cuts machine repair downtime by up to 70% compared to internal rebuilding.
Excavator Overhaul WorkshopsEliminates tedious line-boring, sleeve honing, and crank fitting; saves mechanic labor hours.
Engine Distributors & StockistsHigh-demand 13-ton excavator engine ready for immediate resale to plant hire fleets and repair networks.
Rental Fleet MaintenanceExtends 13-to-14 ton excavator working lifespan and restores full digging hydraulic torque under load.

Hyundai R130-7 Diesel Engine Assembly OEM Diagnostic Guide

Use this OEM manual diagnostic guide to troubleshoot operational engine symptoms on your Hyundai 13-ton excavator:

Engine SymptomTechnical Cause AnalysisTatan Factory-Grade Solution
1. Hard cold starting & dense white smokeMechanical fuel injection pump timing retarded or low compression (<2.8 MPa) in 4 cylinders due to piston ring wear.Adjust mechanical injection pump timing or replace with Tatan complete R130-7 engine assembly.
2. Severe power loss & dense black smoke under digging loadTurbocharger wastegate failure leading to low boost (<1.1 bar) or fuel injection pump governor spring fatigue.Inspect turbocharger boost pressure or swap to a Tatan factory pre-tested R130-7 engine assembly.
3. High engine oil consumption & heavy crankcase blow-byScored cylinder liners, stuck oil rings, or valve stem seal wear allowing engine oil into combustion chambers.Install Tatan new R130-7 complete engine; flush engine oil gallery and replace oil filter.
4. Engine overheating & coolant surge into expansion tankWater pump impeller erosion, clogged radiator core, or cylinder head gasket leaking combustion gas into cooling jacket.Replace thermostat (82°C), flush cooling system, or swap to a new R130-7 complete engine assembly.

Transport Packaging & Fast Global Shipping

To ensure 100% damage-free international transport, every Tatan Hyundai R130-7 engine assembly undergoes anti-rust oiling, waterproof plastic sealing, and solid export wooden box packaging.

Global shipping supported by multiple logistics companies DHL FedEx UPS Sea Air Freight

✈️ Express Air Courier

Partnered with DHL, FedEx, UPS, and TNT for express door-to-door delivery worldwide.

🚢 Sea Cargo Freight

LCL and FCL ocean container shipping for heavy engine assemblies and bulk orders.

📦 Export Wooden Cases

Fumigated solid wooden boxes with thick shockproof foam lining for maximum safety.

Quality Control & International Certificates

Tatan diesel engines are manufactured under ISO 9001 quality management systems and strictly comply with CE safety standards.

Tatan Quality Assurance ISO9001 CE Qualification Certificates

Hyundai R130-7 Engine FAQ & Related Categories

Q1: Is this Hyundai R130-7 Diesel Engine Assembly compatible with Hyundai R130-7 and R140LC-7 excavators?
A: Yes. This engine assembly is engineered for Hyundai Robex R130-7, R130LC-7, and R140LC-7 excavators. Send your original engine nameplate photo or machine serial number to Gavin for precise flywheel housing verification.
Q2: Does the engine assembly include the fuel injection pump and turbocharger?
A: Yes. Tatan complete engine assemblies come pre-assembled with mechanical fuel injection pump, fuel injectors, turbocharger, starter motor, and alternator ready for installation.
Q3: What are the primary OEM part numbers for the Hyundai R130-7 engine?
A: Common OEM reference numbers include 130-7, R130-7, R140LC-7, and 11N4-00010.

Get Wholesale Factory Quote for Hyundai R130-7 Diesel Engine Assembly

Looking for direct factory pricing, stock availability, or technical advice for Hyundai R130-7 engines? Contact senior engineer Gavin now!

💡 Fast Quote: Send your engine serial number or nameplate photos for a 100% accurate match within 10 minutes!

* Note: Wholesale Reference Price Starts From $300.00. Please contact Gavin for a final customized quote.

Reviews

There are no reviews yet.

Be the first to review “Tatan Hyundai R130-7 Excavator Diesel Engine Assembly for Hyundai R130-7 R140LC-7”

Your email address will not be published. Required fields are marked *