4D95LE-2 6204-11-1100 Diesel Engine Assembly for Komatsu PC60-7 Excavator

The 4D95LE-2 6204-11-1100 Engine Assembly by Tatan belongs to our heavy-duty Diesel Engine Assembly category. Engineered specifically for Komatsu PC60-7, PC60-7B, PC70-7, and PC78US-6 6.0-to-7.5 ton excavators, this high-reliability Komatsu 3.3L 4-cylinder water-cooled engine restores 100% digging torque, smooth hydraulic pump driving performance, and ultra-low fuel consumption without any machine frame modifications.

Need an Instant Quote for 4D95LE-2 6204-11-1100 Engine Assembly?

Contact Senior Parts Specialist Gavin directly:

💬 WhatsApp:

Chat with Gavin on WhatsApp

✉️ Email:

[email protected]

5 Key Solutions Buyers Get from Tatan:

  • Fixes Cold Start & Blow-By Gas Instantly: Eliminates low cylinder compression, hard starting, and heavy crankcase blow-by smoke on worn PC60-7 excavators.
  • 1:1 Direct Bolt-On Installation: Pre-matched Komatsu flywheel housing and starter motor mounting angle for zero-cutting installation.
  • Fully Pre-Assembled Complete Unit: Comes complete with mechanical injection pump, injectors, water pump, starter, and alternator ready to drop in.
  • 100% Dynamometer Tested: Dyno-tested under load for oil pressure, operating temperature, and RPM stability before dispatch.
  • Factory Direct Wholesale Price: Cut middleman markup and save up to 40% on excavator engine replacement with 12 months warranty.

Description

4D95LE-2 6204-11-1100 Engine Assembly Overview

The 4D95LE-2 6204-11-1100 Engine Assembly manufactured by Tatan is a 3.260L 4-cylinder naturally aspirated water-cooled diesel engine belonging to our Diesel Engine Assembly classification. Engineered specifically for Komatsu PC60-7, PC60-7B, PC70-7, and PC78US-6 6.0-to-7.5 ton excavators, replacing your worn engine with a Tatan complete assembly eliminates machine downtime, excessive blow-by, and severe hydraulic power loss instantly.

Built strictly according to original Komatsu OEM specifications, this complete engine assembly comes pre-assembled with direct injection pump, fuel injectors, starter motor, and alternator, ensuring 100% direct bolt-on fitment with hydraulic pump couplings and engine mount brackets.

⚠️ Technical Verification Notice: Komatsu PC60-7 4D95LE-2 engines have minor variations in flywheel housing bolt patterns, starter angles, and oil pan sumps depending on production years. Please send your original engine nameplate photo or serial number to Gavin for free verification before ordering.

Key Attributes & Parameters for 4D95LE-2 6204-11-1100 Engine Assembly

Product CategoryDiesel Engine AssemblyWarranty1 Year / 12 Months
Specific Engine ModelKomatsu 4D95LE-2 / S4D95LE-3 EngineBrand NameTatan
Compatible EquipmentKomatsu PC60-7 | PC70-7 ExcavatorOEM Part Number4D95LE-2 / 6204-11-1100
Engine Displacement3.260 Liters (3260 cc / 3.3L)Cylinder Arrangement4 Cylinders Inline (I-4) 4-Stroke
Horsepower & RPM40.0-45.0 kW (54-60 HP) @ 2100-2200Cooling SystemWater-Cooled / Liquid Cooled
Machinery Test ReportProvided (100% Dyno Tested)Video Outgoing-InspectionProvided Before Shipping
Aspiration TypeNaturally Aspirated (NA)Place of OriginGuangdong, China
Quality Status100% Brand New EnginePackagingExport Wooden Box Packaging

Supported Machinery Brands & Engine Parts Coverage

In addition to Komatsu, Tatan manufactures replacement complete diesel engines and overhaul components for leading machinery brands:

Tatan Compatible Excavator Machinery Brands Display Komatsu Yanmar Kobelco Caterpillar Hitachi Volvo

Application Scenarios & Buyer Value

When replacing your excavator engine with our 4D95LE-2 6204-11-1100 Engine Assembly, buyers achieve maximum operational uptime and power efficiency:

Application ScenarioValue Delivered to Buyer
Komatsu PC60-7 Engine SwapComplete engine swap cuts machine repair downtime by up to 70% compared to internal rebuilding.
Excavator Overhaul WorkshopsEliminates tedious line-boring, sleeve honing, and crank fitting; saves mechanic labor hours.
Engine Distributors & StockistsHigh-demand 3.3L excavator engine ready for immediate resale to plant hire fleets and repair networks.
Rental Fleet MaintenanceExtends 6-ton excavator working lifespan and restores full digging hydraulic torque under load.

4D95LE-2 6204-11-1100 Engine Assembly OEM Diagnostic Guide

Use this OEM manual diagnostic guide to troubleshoot operational engine symptoms on your Komatsu PC60-7 excavator:

Engine SymptomTechnical Cause AnalysisTatan Factory-Grade Solution
1. Hard cold starting & dense white smokeMechanical injection pump timing retarded or low compression (<2.8 MPa) in 4 cylinders due to piston ring wear.Adjust injection pump timing or replace with Tatan complete 4D95LE-2 engine assembly.
2. Severe power loss & black smoke under hydraulic loadFuel injection pump governor spring fatigue or clogged mechanical fuel injectors causing incomplete combustion.Inspect fuel injection pressure or swap to a Tatan factory pre-tested 4D95LE-2 complete engine.
3. High engine oil consumption & heavy crankcase blow-byScored 3.3L cylinder liners, stuck oil rings, or valve stem seal wear allowing engine oil into combustion chambers.Install Tatan new 4D95LE-2 complete engine; flush engine oil gallery and replace oil filter.
4. Engine overheating & coolant surge into expansion tankWater pump impeller erosion, clogged radiator core, or cylinder head gasket leaking combustion gas into cooling jacket.Replace thermostat (82°C), flush cooling system, or swap to a new 4D95LE-2 complete engine assembly.

Transport Packaging & Fast Global Shipping

To ensure 100% damage-free international transport, every Tatan 4D95LE-2 6204-11-1100 engine assembly undergoes anti-rust oiling, waterproof plastic sealing, and solid export wooden box packaging.

Global shipping supported by multiple logistics companies DHL FedEx UPS Sea Air Freight

✈️ Express Air Courier

Partnered with DHL, FedEx, UPS, and TNT for express door-to-door delivery worldwide.

🚢 Sea Cargo Freight

LCL and FCL ocean container shipping for heavy engine assemblies and bulk orders.

📦 Export Wooden Cases

Fumigated solid wooden boxes with thick shockproof foam lining for maximum safety.

Quality Control & International Certificates

Tatan diesel engines are manufactured under ISO 9001 quality management systems and strictly comply with CE safety standards.

Tatan Quality Assurance ISO9001 CE Qualification Certificates

4D95LE-2 6204-11-1100 Engine FAQ & Related Categories

Q1: Is this 4D95LE-2 6204-11-1100 Engine Assembly compatible with Komatsu PC60-7 and PC70-7 excavators?
A: Yes. The 4D95LE-2 engine is the standard OEM engine for Komatsu PC60-7, PC60-7B, PC70-7, and PC78US-6 excavators. Send your original engine nameplate photo to Gavin for precise flywheel housing verification.
Q2: Does the engine assembly include the fuel injection pump and starter motor?
A: Yes. Tatan complete engine assemblies come pre-assembled with the fuel injection pump, fuel injectors, water pump, starter motor, and alternator ready for installation.
Q3: What are the primary OEM part numbers for the Komatsu PC60-7 engine?
A: Common OEM reference numbers include 4D95LE-2, 6204-11-1100, 6204-01-1000, and S4D95LE-3.

Get Wholesale Factory Quote for 4D95LE-2 6204-11-1100 Engine Assembly

Looking for direct factory pricing, stock availability, or technical advice for 4D95LE-2 6204-11-1100 engine assemblies? Contact senior engineer Gavin now!

💡 Fast Quote: Send your engine serial number or nameplate photos for a 100% accurate match within 10 minutes!

* Note: Wholesale Reference Price Starts From $300.00. Please contact Gavin for a final customized quote.

Reviews

There are no reviews yet.

Be the first to review “4D95LE-2 6204-11-1100 Diesel Engine Assembly for Komatsu PC60-7 Excavator”

Your email address will not be published. Required fields are marked *