3TNV88 400901-00022 Diesel Engine Assembly for Doosan DH35Z DX35Z Excavator

The 3TNV88 400901-00022 Engine Assembly by Tatan belongs to our heavy-duty Diesel Engine Assembly category. Engineered specifically for Doosan DH35Z, DX35Z, and Solar 035 3.5-ton zero-tail mini excavators, this compact Yanmar 1.6L 3-cylinder water-cooled engine restores 100% digging power, smooth hydraulic operation, and ultra-low fuel consumption without any machine frame modifications.

Need an Instant Quote for 3TNV88 400901-00022 Engine Assembly?

Contact Senior Parts Specialist Gavin directly:

💬 WhatsApp:

Chat with Gavin on WhatsApp

✉️ Email:

[email protected]

5 Key Solutions Buyers Get from Tatan:

  • Fixes Cold Start & Blow-By Gas Instantly: Eliminates low cylinder compression, hard starting, and heavy crankcase blow-by smoke on worn DH35Z excavators.
  • 1:1 Direct Bolt-On Installation: Pre-matched Yanmar flywheel housing and starter motor mounting angle for zero-cutting installation.
  • Fully Pre-Assembled Complete Unit: Comes complete with mechanical injection pump, injectors, water pump, starter, and alternator ready to drop in.
  • 100% Dynamometer Tested: Dyno-tested under load for oil pressure, operating temperature, and RPM stability before dispatch.
  • Factory Direct Wholesale Price: Cut middleman markup and save up to 40% on mini excavator engine replacement with 12 months warranty.

Description

3TNV88 400901-00022 Engine Assembly Overview

The 3TNV88 400901-00022 Engine Assembly manufactured by Tatan is a 1.642L 3-cylinder naturally aspirated water-cooled diesel engine belonging to our Diesel Engine Assembly classification. Engineered specifically for Doosan DH35Z, DX35Z, and Solar 035 3.5-ton mini excavators, replacing your worn engine with a Tatan complete assembly eliminates machine downtime, excessive blow-by, and severe hydraulic power loss instantly.

Built strictly according to original Yanmar OEM specifications, this complete engine assembly comes pre-assembled with direct injection pump, fuel injectors, starter motor, and alternator, ensuring 100% direct bolt-on fitment with hydraulic pump couplings and engine mount brackets.

⚠️ Technical Verification Notice: Doosan DH35Z Yanmar 3TNV88 engines have minor variations in flywheel housing bolt patterns, starter angles, and oil pan sumps depending on production years. Please send your original engine nameplate photo or serial number to Gavin for free verification before ordering.

Key Attributes & Parameters for 3TNV88 400901-00022 Engine Assembly

Product CategoryDiesel Engine AssemblyWarranty1 Year / 12 Months
Specific Engine ModelYanmar 3TNV88 / 3TNV88-BDSA EngineBrand NameTatan
Compatible EquipmentDoosan DH35Z | DX35Z Mini ExcavatorOEM Part Number400901-00022 / 3TNV88
Engine Displacement1.642 Liters (1642 cc / 1.6L)Cylinder Arrangement3 Cylinders Inline (I-3) 4-Stroke
Horsepower & RPM20.2-22.5 kW (27-30 HP) @ 2200-2400Cooling SystemWater-Cooled / Liquid Cooled
Machinery Test ReportProvided (100% Dyno Tested)Video Outgoing-InspectionProvided Before Shipping
Aspiration TypeNaturally Aspirated (NA)Place of OriginGuangdong, China
Quality Status100% Brand New EnginePackagingExport Wooden Box Packaging

Supported Machinery Brands & Engine Parts Coverage

In addition to Doosan and Yanmar, Tatan manufactures replacement complete diesel engines and overhaul components for leading machinery brands:

Tatan Compatible Excavator Machinery Brands Display Doosan Yanmar Kobelco Caterpillar Hitachi Volvo Komatsu

Application Scenarios & Buyer Value

When replacing your mini excavator engine with our 3TNV88 400901-00022 Engine Assembly, buyers achieve maximum operational uptime and power efficiency:

Application ScenarioValue Delivered to Buyer
Doosan DH35Z / DX35Z Engine SwapComplete engine swap cuts machine repair downtime by up to 70% compared to internal rebuilding.
Excavator Overhaul WorkshopsEliminates tedious line-boring, sleeve honing, and crank fitting; saves mechanic labor hours.
Engine Distributors & StockistsHigh-demand 1.6L mini excavator engine ready for immediate resale to plant hire fleets and repair networks.
Rental Fleet MaintenanceExtends 3.5-ton mini excavator working lifespan and restores full digging hydraulic torque under load.

3TNV88 400901-00022 Engine Assembly OEM Diagnostic Guide

Use this OEM manual diagnostic guide to troubleshoot operational engine symptoms on your Doosan DH35Z mini excavator:

Engine SymptomTechnical Cause AnalysisTatan Factory-Grade Solution
1. Hard cold starting & dense white smokeMechanical injection pump timing retarded or low compression (<2.8 MPa) in 3 cylinders due to piston ring wear.Adjust Yanmar injection pump timing or replace with Tatan complete 3TNV88 engine assembly.
2. Severe power loss & black smoke under hydraulic loadFuel injection pump governor spring fatigue or clogged mechanical fuel injectors causing incomplete combustion.Inspect fuel injection pressure or swap to a Tatan factory pre-tested 3TNV88 complete engine.
3. High engine oil consumption & heavy crankcase blow-byScored 1.6L cylinder liners, stuck oil rings, or valve stem seal wear allowing engine oil into combustion chambers.Install Tatan new 3TNV88 complete engine; flush engine oil gallery and replace oil filter.
4. Engine overheating & coolant surge into expansion tankWater pump impeller erosion, clogged radiator core, or cylinder head gasket leaking combustion gas into cooling jacket.Replace thermostat (82°C), flush cooling system, or swap to a new 3TNV88 complete engine assembly.

Transport Packaging & Fast Global Shipping

To ensure 100% damage-free international transport, every Tatan 3TNV88 400901-00022 engine assembly undergoes anti-rust oiling, waterproof plastic sealing, and solid export wooden box packaging.

Global shipping supported by multiple logistics companies DHL FedEx UPS Sea Air Freight

✈️ Express Air Courier

Partnered with DHL, FedEx, UPS, and TNT for express door-to-door delivery worldwide.

🚢 Sea Cargo Freight

LCL and FCL ocean container shipping for heavy engine assemblies and bulk orders.

📦 Export Wooden Cases

Fumigated solid wooden boxes with thick shockproof foam lining for maximum safety.

Quality Control & International Certificates

Tatan diesel engines are manufactured under ISO 9001 quality management systems and strictly comply with CE safety standards.

Tatan Quality Assurance ISO9001 CE Qualification Certificates

3TNV88 400901-00022 Engine FAQ & Related Categories

Q1: Is this 3TNV88 400901-00022 Engine Assembly compatible with Doosan DX35Z and Solar 035 excavators?
A: Yes. The Yanmar 3TNV88 engine is the standard OEM engine for Doosan Daewoo DH35Z, DX35Z, and Solar 035 mini excavators. Send your original engine nameplate photo to Gavin for precise flywheel housing verification.
Q2: Does the engine assembly include the fuel injection pump and starter motor?
A: Yes. Tatan complete engine assemblies come pre-assembled with the fuel injection pump, fuel injectors, water pump, starter motor, and alternator ready for installation.
Q3: What are the primary OEM part numbers for the Doosan DH35Z Yanmar engine?
A: Common OEM reference numbers include 3TNV88, 400901-00022, 129608-01330, and 400901-00010.

Get Wholesale Factory Quote for 3TNV88 400901-00022 Engine Assembly

Looking for direct factory pricing, stock availability, or technical advice for 3TNV88 400901-00022 engine assemblies? Contact senior engineer Gavin now!

💡 Fast Quote: Send your engine serial number or nameplate photos for a 100% accurate match within 10 minutes!

* Note: Wholesale Reference Price Starts From $300.00. Please contact Gavin for a final customized quote.

Reviews

There are no reviews yet.

Be the first to review “3TNV88 400901-00022 Diesel Engine Assembly for Doosan DH35Z DX35Z Excavator”

Your email address will not be published. Required fields are marked *