K3V112DT 2401-9287A Hydraulic Pump Assembly for Doosan DH258-7 Excavator Loader

$1,300.00

K3V112DTP Main Hydraulic Pump Assembly for
Doosan DH258-7 excavators.
Supplied as a 100% Brand-New, zero-working-hour complete pump
for excavator repair, fleet maintenance, dealer stock and wholesale replacement.

Pump Model: K3V112DTP-HNOV-14T
Main Assembly P/N: 2401-9287A
·
Reference: 2401-9287 / 400912-00016
Condition:
100% Brand New
·
Warranty: 12 Months

Send Gavin the old pump nameplate and photos before ordering.
K3V112 pumps have different configurations, so the complete suffix and old-pump layout matter.

Description

Doosan DH258-7 K3V112DTP Hydraulic Pump 2401-9287A

A replacement pump for a Doosan DH258-7 should be ordered by more than the words
“K3V112 pump.”
The pump family is widely used across excavators, but the configuration fitted to the machine matters.

For this application, Tatan Machinery supplies the
K3V112DTP-HNOV-14T main hydraulic pump assembly,
with 2401-9287A used as the primary complete-pump reference on this listing.
The supplied assembly is 100% Brand New with zero working hours.

Pump Details for Purchasing

ExcavatorDoosan / Daewoo DH258-7
Pump FamilyK3V112 Series
Pump ModelK3V112DTP-HNOV-14T
Main Assembly P/N2401-9287A
Additional References2401-9287 / 400912-00016
ProductComplete Main Hydraulic Pump Assembly
Condition100% Brand New — Zero Working Hours
Warranty12 Months
OriginGuangdong, China

Why We Keep the Full K3V112DTP-HNOV-14T Model in the Order

K3V112 identifies a pump family, not every detail of the pump installed on the excavator.
K3V112 variants are used across many different machines,
and suffix, shaft and external configuration can differ between applications. :chatgpt-content-reference{index=”1″}

For DH258-7, published hydraulic-pump application lists identify
K3V112DTP-HNOV-14T with PTO.
That is much more useful for purchasing than ordering a generic “K3V112DT” from a photo. :chatgpt-content-reference{index=”2″}

Before We Pack the Pump, We Compare It with Your Old Unit

A DH258-7 may have been repaired or had its hydraulic pump replaced during years of service.
For an international order, the safest approach is to compare the pump actually installed on the excavator.

Send the old pump nameplate whenever possible.
If the plate is missing or unreadable, send several clear photos instead.

Useful photos:
complete pump · drive-shaft side · regulator side · main ports · PTO / gear-pump side · old nameplate

Have a Photo of Your Old DH258-7 Pump?

Send it directly to Gavin. We can compare the model, shaft and external configuration before quotation.

See the DH258-7 Pump, Not Just a Catalog Number

For a complete main pump, buyers normally want to see the assembly before it leaves the supplier:
the pump body, regulator arrangement, drive end and external connections are all useful identification points.

Use the position below for your real
DH258-7 K3V112DTP hydraulic pump photos.
For an active order, current-unit photos can also be sent directly during fitment confirmation.

Doosan DH258-7 K3V112DTP Hydraulic Pump 2401-9287A

DH258-7 K3V112DTP Hydraulic Pump Video

See the actual DH258-7 hydraulic pump and its external configuration before ordering.

Weak Hydraulics Do Not Automatically Mean You Need a Complete Pump

A slow excavator, weak digging force or abnormal hydraulic response can lead a buyer to suspect the main pump,
but the complete hydraulic system should be considered before a major assembly is replaced.

If the workshop has already confirmed excessive internal pump wear,
major pump damage or a complete-pump failure,
a Brand-New assembly can reduce the uncertainty of another repair.
If the problem is limited to a repairable component,
ask us about hydraulic pump parts or repair kits instead.

Complete Pump or Pump Repair Parts?

This page is for a complete K3V112DTP main hydraulic pump assembly.
If your repair shop only needs a piston shoe, cylinder block,
valve plate, seal kit, regulator-related part or another internal component,
send us the damaged part information instead.
The right purchase depends on the actual repair scope.

A New Pump Should Not Go Into a Dirty Hydraulic System

If the previous pump suffered internal damage,
contamination from that failure should be dealt with before the replacement pump is installed.
The hydraulic oil, filtration and connected circuit should be checked according to the machine’s repair condition.

Keep open ports clean during installation,
confirm the drive connection and hose layout against the old unit,
and make sure the pump is correctly prepared before initial startup.
A Brand-New pump should not be used to mask an unresolved contamination or system problem.

100% Brand New Hydraulic Pump
Zero Working Hours · 12-Month Warranty

This DH258-7 hydraulic pump is supplied as a Brand-New complete assembly,
not a repaired or remanufactured pump.
Tatan Machinery provides a 12-month replacement warranty against confirmed
product-quality defects under the agreed application and warranty conditions.

Packing the Complete Pump for Export

A complete hydraulic pump is a heavy precision assembly.
The unit is protected and secured for international transportation,
with wooden packing used according to the shipment.

DH258-7 K3V112DTP Hydraulic Pump Export PackingDH258-7 K3V112DTP Hydraulic Pump Export PackingDH258-7 K3V112DTP Hydraulic Pump Export Packing

From Our Warehouse to Your Workshop

Tell us the destination when requesting your quotation.
Shipping can be arranged according to the pump weight,
destination, order quantity and required delivery speed.

Express / Courier:
UPS · DHL · FedExFreight:
Air Freight · Sea Freight

Tatan Machinery Hydraulic Pump Shipping UPS DHL FedEx Air Freight Sea Freight

For a single pump or urgent repair order, ask Gavin about the practical shipping options for your destination.
For combined or wholesale orders, freight options can be discussed together with the quotation.

Questions Buyers Ask Before Ordering


Is this K3V112DT or K3V112DTP?

For this DH258-7 application, the more specific configuration used on this page is
K3V112DTP-HNOV-14T.
Send the old pump nameplate before shipment so the actual configuration can be checked.


Is this a complete hydraulic pump?

Yes. This listing is for the complete main hydraulic pump assembly,
not an internal pump repair kit.


Is the pump remanufactured?

No. Tatan Machinery supplies this hydraulic pump 100% Brand New with zero working hours.
Only our diesel engine assemblies are professionally remanufactured.


Can you ship the pump internationally?

Yes. Depending on the destination and shipment,
we support UPS, DHL, FedEx, air freight and sea freight.
Send your destination together with the inquiry.

Other Major Assemblies for Doosan DH258-7

CONTROL VALVE:

DH258-7 Main Control Valve

BRAND NEW
SWING MOTOR:

DH258-7 Swing Motor Assembly

BRAND NEW

Need a DH258-7 K3V112DTP Hydraulic Pump?

Send Gavin your old pump nameplate, pump photos,
machine information and destination.
We can check the configuration before preparing your quotation and shipping option.

Tatan Machinery · Excavator Parts Wholesaler · Guangdong, China

* Note: Wholesale Reference Price Starts From $300.00. Please contact Gavin for a final customized quote.

Reviews

There are no reviews yet.

Be the first to review “K3V112DT 2401-9287A Hydraulic Pump Assembly for Doosan DH258-7 Excavator Loader”
Review now to get coupon!

Your email address will not be published. Required fields are marked *