MAG-33VP 708-2G-00040 Travel Motor Final Drive Assembly for Komatsu PC160-7 Excavator

Komatsu PC160-7 tracking off-steer, losing pulling power on steep inclines, or leaking gear oil into the track hub? The MAG-33VP 708-2G-00040 Travel Motor Final Drive Assembly by Tatan is a 1:1 heavy-duty bolt-on replacement unit designed for Komatsu PC160-7 and PC160LC-7 16-ton excavators. Pre-assembled with an integrated planetary reduction gearbox, it restores 100% equal tracking torque and fast transport speed immediately.

💡 Need to confirm sprocket bolt count or request a wholesale quote?

Contact Senior Hydraulic Specialist Gavin directly:

💬 WhatsApp:

Chat with Gavin on WhatsApp

✉️ Email:

[email protected]

Why Fleet Owners Choose Tatan Final Drive Assemblies:

  • Fixes 16-Ton Excavator Off-Tracking: Eliminates single-side track dragging and restores balanced 2-speed travel power across loose terrain.
  • Zero Gear Oil Leakage Guarantee: Equipped with heavy-duty forged alloy steel Duo-Cone mechanical floating seals to block mud and water ingress.
  • 1:1 Direct Bolt-On Fitment: Standard sprocket bolt pattern and SAE hydraulic ports match original Komatsu undercarriage frames seamlessly.
  • Factory Bench Pressure Tested: Dyno-tested under 34.3 MPa relief pressure for zero internal bypass and maximum volumetric efficiency.
  • 12 Months Warranty: Backed by a full year warranty and fast international express shipping to minimize machine downtime.

Description

MAG-33VP 708-2G-00040 Travel Motor Overview

The MAG-33VP 708-2G-00040 Travel Motor Final Drive Assembly (OEM Part Numbers: 708-2G-00040, 708-2G-00041, 708-2G-00042, MAG-33VP) manufactured by Tatan is a heavy-duty hydraulic travel device belonging to our Excavator Final Drive Travel Motor classification. Specifically engineered for Komatsu PC160-7 and PC160LC-7 16-ton excavators, swapping out a failed unit with a Tatan complete MAG-33VP 708-2G-00040 Travel Motor unit immediately resolves off-tracking and track frame oil leaks.

This complete assembly combines a variable displacement piston motor with a heavy-duty planetary reduction gearbox, engineered for direct bolt-on replacement without track frame modifications.

⚠️ Technical Verification: Komatsu PC160-7 machines can have different sprocket bolt hole configurations depending on production serial numbers. Send your sprocket bolt count to Gavin to verify compatibility before dispatch.

Key Attributes & Parameters for MAG-33VP 708-2G-00040 Travel Motor

Product CategoryExcavator Final Drive Travel MotorWarranty1 Year / 12 Months
Specific Motor ModelKayaba MAG-33VP / GM38 MotorBrand NameTatan
Compatible EquipmentKomatsu PC160-7 | PC160LC-7 ExcavatorOEM Part Number708-2G-00040 / MAG-33VP
Matched Engine SeriesKomatsu SAA4D95LE-2 EnginePlace of OriginGuangdong, China
Max Working Pressure34.3 MPa (343 bar / 4970 PSI)Reduction RatioHeavy-Duty Gearbox (~46.5:1)
Floating Seal TypeDuo-Cone Mechanical SealsQuality Status100% Brand New Assembly
Machinery Test ReportProvided (100% Bench Tested)Video Outgoing-InspectionProvided Before Shipping
Gear Oil SpecSAE 80W-90 Heavy Duty Gear OilPackagingExport Wooden Box Packaging

Supported Machinery Brands & Final Drive Parts Coverage

In addition to Komatsu, Tatan manufactures replacement complete travel motors and final drives for major excavator brands:

Tatan Compatible Excavator Machinery Brands Display Komatsu Caterpillar Hitachi Kobelco Volvo Doosan

Application Scenarios & Buyer Value

When replacing your 16-ton excavator undercarriage drive with our MAG-33VP 708-2G-00040 Travel Motor, buyers achieve maximum operational uptime and pulling power:

Application ScenarioValue Delivered to Buyer
Komatsu PC160-7 Fleet Emergency SwapAvoid long repair delays; bolt on a pre-tested final drive unit and put your machine back to work in hours.
Professional Repair WorkshopsDeliver reliable, high-performance undercarriage repairs backed by a full 1-year commercial warranty.
Heavy Equipment Parts DistributorsStock high-velocity Komatsu travel motor assemblies to fulfill urgent contractor orders locally.
Contractor Project SitesRestore equal 2-speed tracking power and gradeability on demanding muddy terrain.

MAG-33VP 708-2G-00040 Travel Motor OEM Diagnostic Guide

Use this professional diagnostic reference when evaluating tracking and drive issues on Komatsu PC160-7 machines:

Hydraulic/Mechanical SymptomTechnical Cause AnalysisTatan Factory-Grade Solution
1. Excavator Pulling to One Side / Slow TrackingInternal oil bypass inside the worn axial piston block under 34.3 MPa load.Install Tatan MAG-33VP 708-2G-00040 Travel Motor unit; inspect center swivel seals.
2. Heavy Gear Oil Leakage into Track HubDuo-Cone floating seal face damage from wire wrap or abrasive mud.Replace with a complete pre-assembled final drive unit featuring new forged floating seals.
3. Metallic Grinding Noise in Reduction GearboxPlanetary gear tooth pitting or bearing collapse from contaminated gear oil.Swap out the damaged drive and refill with fresh SAE 80W-90 gear lubricant.
4. High-Speed (Rabbit) Travel Mode Fails2-speed shift spool sticking or pilot pressure drop below 2.5 MPa.Check shift control valve pressure or replace complete travel motor assembly.

Transport Packaging & Fast Global Shipping

Every Tatan travel motor assembly is securely mounted onto reinforced wooden pallets, sealed in anti-moisture barrier bags, and encased in heavy fumigated timber crates for international transport protection.

Global shipping supported by multiple logistics companies DHL FedEx UPS Sea Air Freight

✈️ Express Air Courier

Partnered with DHL, FedEx, UPS, and TNT for express urgent parts delivery worldwide.

🚢 Sea Cargo Freight

LCL and FCL ocean container shipping for heavy travel motor assemblies and bulk orders.

📦 Export Wooden Cases

Fumigated solid wooden boxes with thick shockproof foam lining for maximum safety.

Quality Control & International Certificates

Tatan final drive travel motors are manufactured under strict ISO 9001 quality frameworks and comply with international machinery export criteria.

Tatan Quality Assurance ISO9001 CE Qualification Certificates

MAG-33VP 708-2G-00040 Travel Motor FAQ & Related Categories

Q1: Is this MAG-33VP 708-2G-00040 Travel Motor final drive assembly compatible with Komatsu PC160-7 and PC160LC-7 excavators?
A: Yes. The Kayaba MAG-33VP travel motor is the exact OEM specification for PC160-7 and PC160LC-7 16-ton excavators. Share your sprocket bolt count with Gavin to verify flange dimensions before shipment.
Q2: Does the final drive assembly arrive pre-filled with gear oil?
A: Units are shipped dry or with protective oil to prevent transit spills. You must fill the planetary gearbox with SAE 80W-90 gear oil up to the level plug prior to initial machine operation.
Q3: What are the main OEM interchange part numbers?
A: Frequent interchange numbers include 708-2G-00040, 708-2G-00041, 708-2G-00042, and MAG-33VP.

Get Wholesale Factory Quote for MAG-33VP 708-2G-00040 Travel Motor

Looking for direct factory pricing or technical guidance for your MAG-33VP 708-2G-00040 Travel Motor? Contact senior engineer Gavin now!

💡 Fast Quote: Send your engine serial number or nameplate photos for a 100% accurate match within 10 minutes!

* Note: Wholesale Reference Price Starts From $300.00. Please contact Gavin for a final customized quote.

Reviews

There are no reviews yet.

Be the first to review “MAG-33VP 708-2G-00040 Travel Motor Final Drive Assembly for Komatsu PC160-7 Excavator”

Your email address will not be published. Required fields are marked *