MAG-18VP 708-2L-00105 Travel Motor Final Drive for Komatsu PC60-7 Excavator

Need price, stock check, or fitment verification for Komatsu PC60-7?

Contact Senior Engineer Gavin:

💬 WhatsApp: Chat on WhatsApp |
✉️ Email: [email protected]

Direct Technical Answers for Komatsu PC60-7 Travel Motor:

  • Exact Fitment: Direct replacement for Kayaba MAG-18VP / OEM part number 708-2L-00105. Fits Komatsu PC60-7, PC60-7B, and PC70-7 excavators.
  • Fixes Tracking Issues: Resolves single-side slow tracking, loss of climbing power, and track dragging instantly.
  • Seal Protection: Pre-assembled with heavy-duty Duo-Cone mechanical floating seals to prevent gear oil leaks in mud/water.
  • Installation: 1:1 original sprocket bolt hole flange and standard SAE hydraulic hose connections—no cutting or bracket changes.
  • Quality Assurance: 100% bench tested under 24.5 MPa working pressure before shipment. Comes with a 12-month warranty.

Description

The MAG-18VP 708-2L-00105 Travel Motor final drive assembly by Tatan is a complete 2-speed axial piston hydraulic motor with an integrated planetary reduction gearbox. Built specifically for Komatsu PC60-7, PC60-7B, and PC70-7 excavators, this unit replaces worn or damaged travel motors to restore full machine tracking torque and travel speed.

MAG-18VP 708-2L-00105 Travel Motor Technical Specifications
Machine FitmentKomatsu PC60-7 / PC60-7B / PC70-7 ExcavatorMotor ModelKayaba MAG-18VP / MAG-18
OEM Part Number708-2L-00105 / 708-2L-00106Engine MatchKomatsu 4D95LE-2 / S4D95LE-3
Working Pressure24.5 MPa (245 bar)Gearbox Type2-Stage Planetary Reduction
Seal TypeDuo-Cone Mechanical Floating SealsTesting & Warranty100% Bench Tested | 12 Months Warranty

Komatsu excavator spare parts compatibility display

MAG-18VP 708-2L-00105 Travel Motor Troubleshooting Guide
Observed ProblemProbable CauseRecommended Solution
Excavator tracks off-steer (pulls to one side)Internal wear in piston cylinder block or worn swashplate causing high-pressure fluid bypass.Replace with a complete MAG-18VP 708-2L-00105 travel motor assembly. Check center swivel joint seals.
Gear oil leaking from sprocket hubDamaged Duo-Cone floating seal faces or hardened rubber ring caused by wire/mud wrapping.Replace the travel motor assembly or install a new heavy-duty Duo-Cone seal kit.
Grinding noise inside final drive gearboxBroken planetary gear teeth or failed needle bearings due to contaminated or insufficient gear oil.Install a new final drive unit. Fill with fresh SAE 80W-90 gear oil before operating.

Global logistics shipping methods for heavy machinery parts
ISO9001 and CE quality certificates for Tatan machinery parts

Frequently Asked Questions

Q: Does this MAG-18VP 708-8L-00105 Travel Motor come with gear oil?
A: No, travel motors are shipped drained of oil for air/sea safety. You must add SAE 80W-90 gear oil to the gearbox fill plug prior to initial operation.

Q: How do I confirm this fits my specific PC60-7 machine?
A: Check your old motor nameplate or count the bolt holes on your track sprocket flange (usually 12 or 16 bolts). Send a photo to Gavin on WhatsApp for 100% confirmation.

Get Factory Price for MAG-18VP 708-2L-00105 Travel Motor

Need stock status, fast shipping rates, or fitment confirmation? Contact senior engineer Gavin now:

* Note: Wholesale Reference Price Starts From $300.00. Please contact Gavin for a final customized quote.

Reviews

There are no reviews yet.

Be the first to review “MAG-18VP 708-2L-00105 Travel Motor Final Drive for Komatsu PC60-7 Excavator”

Your email address will not be published. Required fields are marked *