TM22 2401-9252 Travel Motor Final Drive Assembly for Doosan DX150 DX150LC Excavator

The TM22 2401-9252 Travel Motor Final Drive Assembly by Tatan is engineered specifically to solve travel off-tracking and gear oil leakage issues on Doosan DX150, DX150LC, and DX140LC 15-ton excavators. Featuring a 1:1 OEM bolt-on 18-hole sprocket flange and heavy-duty planetary reduction gearbox, this complete hydraulic drive restores 100% tracking power and 2-speed travel speed without any hydraulic hose modifications.

Need an Instant Quote for TM22 2401-9252 Travel Motor?

Contact Senior Parts Specialist Gavin directly:

💬 WhatsApp:

Chat with Gavin on WhatsApp

✉️ Email:

[email protected]

5 Key Solutions Buyers Get from Tatan:

  • Fixes Excavator Off-Tracking Immediately: Replaces worn travel motors to eliminate single-side slow tracking and restore equal left/right track speed.
  • Zero Gear Oil Leakage Guarantee: Pre-installed with forged alloy steel Duo-Cone mechanical floating seals to prevent mud and water ingress.
  • 100% Direct Bolt-On Installation: 18-bolt sprocket flange pattern and standard SAE port threads match Doosan DX150 track frames seamlessly.
  • Smooth 2-Speed High/Low Switching: Automatic swashplate displacement adjustment provides high torque for slope climbing and fast travel.
  • 100% Factory Bench Pressure Tested: Dyno-tested under 34.3 MPa relief pressure for zero internal bypass before shipping.
  • No MOQ (1 PC Accepted): Direct factory pricing for single workshop repairs or fleet maintenance with 12 months warranty.

Description

TM22 2401-9252 Travel Motor Final Drive Assembly Overview

The TM22 2401-9252 Travel Motor Final Drive Assembly (OEM Part Numbers: 2401-9252, 2401-9252A, 400915-00008, TM22) manufactured by Tatan is a heavy-duty hydraulic travel device belonging to our Excavator Final Drive Travel Motor classification. Specially engineered for Doosan Daewoo DX150, DX150LC, DX140LC, and Solar 150LC-V 15-ton excavators, this complete travel motor with 2-stage planetary reduction gearbox delivers smooth 2-speed travel, powerful pulling force, and equal tracking torque under muddy and rocky job site conditions.

Constructed strictly according to original OEM specifications, this travel motor assembly integrates an axial piston motor and a heavy-duty planetary reduction gearbox, ensuring 100% direct bolt-on fitment to track frame sprockets without hose modification.

⚠️ Tracking Fitment Technical Notice: Doosan DX150 excavators use standard 18-bolt sprocket flange patterns. Please verify your original travel motor sprocket bolt count or nameplate photo with Gavin for free verification before dispatch.

Key Attributes & Technical Parameters for TM22 2401-9252 Travel Motor

Product CategoryExcavator Final Drive Travel MotorWarranty1 Year / 12 Months
Specific Motor ModelNabtesco TM22 / MAG-170VP MotorBrand NameTatan
Compatible EquipmentDoosan DX150 | DX150LC ExcavatorOEM Part Number2401-9252 / 2401-9252A
Matched Engine SeriesDoosan DL06 / DB58TIS EnginePlace of OriginGuangdong, China
Max Working Pressure34.3 MPa (343 bar / 4970 PSI)Reduction RatioHeavy-Duty Gearbox (~49.8:1)
Sprocket Flange Pattern18-Bolt Sprocket Flange (18H)Floating Seal TypeDuo-Cone Mechanical Seals
Machinery Test ReportProvided (100% Bench Tested)Video Outgoing-InspectionProvided Before Shipping
Gear Oil SpecSAE 80W-90 Heavy Duty Gear OilPackagingExport Wooden Box Packaging

Supported Machinery Brands & Final Drive Parts Coverage

In addition to Doosan, Tatan manufactures replacement complete travel motors and final drives for major excavator brands:

Tatan Compatible Excavator Machinery Brands Display Doosan Kobelco Caterpillar Hitachi Volvo Komatsu

Application Scenarios & Buyer Value

When replacing your undercarriage drive with our TM22 2401-9252 Travel Motor, buyers achieve maximum operational uptime and pulling power:

Application ScenarioValue Delivered to Buyer
Doosan DX150 Travel Motor ReplacementComplete assembly replacement eliminates single-side off-tracking and restores equal 2-speed travel power.
Undercarriage Repair WorkshopsReplaces complex planetary gear rebuilding; saves mechanic labor hours and prevents field leak warranties.
Parts Distributors & StockistsHigh-demand 15-ton excavator final drive stock item ready for fast local sale to construction contractors.
Rental Fleet MaintenanceExtends excavator working hours and ensures maximum job site productivity.

TM22 2401-9252 Travel Motor OEM Diagnostic Guide

Use this OEM manual diagnostic guide to troubleshoot tracking and travel motor issues on your Doosan DX150 excavator:

Hydraulic/Mechanical SymptomTechnical Cause AnalysisTatan Factory-Grade Solution
1. Excavator tracking off-steer / One side slowWorn motor piston cylinder block or pilot swashplate angle wear causing internal oil bypass under 31.4 MPa load.Replace with Tatan TM22 complete 2401-9252 final drive motor assembly; check center swivel joint seals.
2. Gear oil leaking into track sprocket hubDuo-Cone floating seal face damage or rubber O-ring degradation allowing gear oil to escape from hub.Replace complete final drive assembly or install high-durability forged steel Duo-Cone floating seal kit.
3. Loud metallic grinding noise during travel1st or 2nd planetary gear tooth breakage or needle bearing collapse due to insufficient gear oil lubrication.Install Tatan new complete travel motor with gearbox; refill with SAE 80W-90 heavy-duty gear oil before operation.
4. High-speed (Rabbit speed) shift failure2-speed shift pilot control spool sticking or pilot line pressure drop (<2.5 MPa) to swashplate piston.Clean 2-speed control valve spool, check pilot shift pressure, or replace complete travel motor assembly.

Transport Packaging & Fast Global Shipping

To ensure 100% damage-free international transport, every Tatan TM22 2401-9252 travel motor final drive undergoes anti-rust oiling, waterproof plastic sealing, and solid export wooden box packaging.

Global shipping supported by multiple logistics companies DHL FedEx UPS Sea Air Freight

✈️ Express Air Courier

Partnered with DHL, FedEx, UPS, and TNT for express door-to-door delivery worldwide.

🚢 Sea Cargo Freight

LCL and FCL ocean container shipping for heavy final drive assemblies and bulk orders.

📦 Export Wooden Cases

Fumigated solid wooden boxes with thick shockproof foam lining for maximum safety.

Quality Control & International Certificates

Tatan final drive travel motors are manufactured under ISO 9001 quality management systems and strictly comply with CE safety standards.

Tatan Quality Assurance ISO9001 CE Qualification Certificates

TM22 2401-9252 Travel Motor FAQ & Related Categories

Q1: Is this TM22 2401-9252 Travel Motor final drive assembly compatible with Doosan DX150LC and Solar 150LC-V excavators?
A: Yes. The Nabtesco TM22 / MAG-170VP travel motor is the standard OEM drive for Doosan Daewoo DX150, DX150LC, DX140LC, and Solar 150LC-V excavators. Send your original motor sprocket bolt count to Gavin for precise flange double-checking.
Q2: Does the travel motor come filled with gear oil in the reduction gearbox?
A: Travel motors are drained of gear oil prior to air transport. You MUST fill the planetary gearbox with SAE 80W-90 gear oil until it reaches the level plug before initial machine operation.
Q3: What are the primary OEM part numbers for the Doosan DX150 travel motor?
A: Common OEM reference numbers include 2401-9252, 2401-9252A, 400915-00008, and TM22.

Get Wholesale Factory Quote for TM22 2401-9252 Travel Motor

Looking for direct factory pricing, stock availability, or technical advice for TM22 2401-9252 travel motors? Contact senior engineer Gavin now!

💡 Fast Quote: Send your machine serial number or old motor photos for a 100% accurate match within 10 minutes!

* Note: Wholesale Reference Price Starts From $300.00. Please contact Gavin for a final customized quote.

Reviews

There are no reviews yet.

Be the first to review “TM22 2401-9252 Travel Motor Final Drive Assembly for Doosan DX150 DX150LC Excavator”

Your email address will not be published. Required fields are marked *